ILS Chains
LED Chains provide lighting manufacturers with a flexible, effective and convenient method of employing LEDs in direct lighting, decorative lighting, backlighting signs and much more. You can choose from the ILS’ standard product ranges or have a purpose built chain specified and built for you with no tooling or set-up costs. The photometrics of the chains can adjusted to suit your end use by the use of inexpensive light shaping lenses or reflectors fitted to each LED. Users are finding numerous uses for LED chains and ILS can advise and supply fast samples to suit you application.
Dragon chains used in ceiling luminaire
(diffuser removed)
Oslon chain used in tube light
LED chains used as backlight
ILS Standard Chains - Suitable to Light 1 metre length
Osram Oslon Chains
each chain contains 11 LEDs; 85mm LED-LED; 850mm Lit Length; 300 mm Lead-ins
| ILS PART NUMBER | Colour* | CRI | Radiance Angle | Flux †§ [Typ] @ 350mA | Flux †§ [Typ] @ 700mA | Radiance Pattern |
|---|---|---|---|---|---|---|
| ILL-ON11-ULWH-SC201. | Cool White -6000-6500K | NA | 80° (+/- 40°) | 1185lms | 1955lms |  |
| ILL-ON11-NuWH-SC201. | Neutral White 4000K | NA | 80° (+/- 40°) | 1018lms | 1680lms | |
| ILL-ON11-WMWH-SC201. | Warm White - 3000K | NA | 80° (+/- 40°) | 950lms | 1567lms | |
| ILL-ON11-DEBL-SC201. | Deep blue - 455nm | NA | 80° (+/- 40°) | 5482mW | 9046mW | |
| ILL-ON11-TRGR-SC201. | True Green - 528 mn | NA | 80° (+/- 40°) | 1096lms | 1809lms | |
| ILL-ON11-YELL-SC201. | Yellow -590nm | NA | 80° (+/- 40°) | 695lms | 1147lms | |
| ILL-ON11-REOR-SC201. | Red-Orange - 617 nm | NA | 80° (+/- 40°) | 803lms | 1325lms | |
| ILL-ON11-RED1-SC201. | Red - 625 nm | NA | 80° (+/- 40°) | 803lms | 1325lms | |
| ILL-ON11-HYRE-SC201. | Hyper-Red 656 nm | NA | 80° (+/- 40°) | 3916mW | 6461mW |
Suitable lenses: Lisa and Tina pin lenses and Regina reflectors
Stanley 3J Chains
each chain contains 11 LEDs; 85mm LED-LED; 850mm Lit Length; 300 mm Lead-ins
Osram Dragon Chains
11 LEDs; 85mm LED-LED; 850mm Lit Length; 300 mm Lead-ins
Suitable lenses: Lisa and Showin Twist-on and Clip-on Lens
*Due to the special conditions of the manufacturing processes of LED the typical data of technical parameters can only reflect statistical figures and do not necessarily correspond to the actual parameters of each single product which could differ from the typical data.
§ Tolerance +/- 10%
† Measured with 20mS pulse at 25°c
Consult ILS for drivers for the above chains
ILS Purpose Built Chains
LED chains are simple and quick to build. This makes them very adaptable for your requirement. Normally a sample purpose built chain can be made in less than 2 weeks.